projekt kivitendo

[authentication]

# The cleartext password for access to the administrative part. It

# can only be changed in this file, not via the administrative

# interface.

admin_password = admin123

# Which modules to use for authentication. Valid values are 'DB' and

# 'LDAP'. You can use multiple modules separated by spaces.

#

# Multiple LDAP modules with different configurations can be used by

# postfixing 'LDAP' with the name of the configuration section to use:

# 'LDAP:ldap_fallback' would use the data from

# '[authentication/ldap_fallback]'. The name defaults to 'ldap' if it

# isn't given.

#

# Note that the LDAP module doesn't support changing the password.

module = DB

# The cookie name can be changed if desired.

cookie_name = kivitendo_session_id

# The number of minutes a session is valid. The default value is eight

# hours.

session_timeout = 480

# The number of seconds to penalize failed login attempts. 0 disables

# it.

failed_login_penalty = 5

[authentication/database]

# Connection information for the database with the user and group

# inforamtion. This information is always needed, even if LDAP is

# used for authentication, as the user information is stored in this

# database while LDAP is only used for password verification.

#

# If 'module' is set to 'DB' then this database also contains the

# users' passwords.

host = localhost

port = 5432

db = kivitendo_auth

user = postgres

password =

[authentication/ldap]

# This section is only relevant if 'module' is set to 'LDAP'. It names

# the LDAP server the passwords are verified against by doing a LDAP

# bind operation.

#

# At least the parameters 'host', 'attribute' and 'base_dn' have to be

# specified.

#

# tls: Activate encryption via TLS

# verify: If 'tls' is used, how to verify the server's certificate.

# Can be one of 'require' or 'none'.

# attribute: Name of the LDAP attribute containing the user's login name

# base_dn: Base DN the LDAP searches start from

# filter: An optional LDAP filter specification. The string '<%login%>'

# is replaced by the user's login name before the search is started.

# bind_dn and bind_password:

# If searching the LDAP tree requires user credentials

# (e.g. ActiveDirectory) then these two parameters specify

# the user name and password to use.

# timeout: Timeout when connecting to the server in seconds.

#

# You can specify a fallback LDAP server to use in case the main one

# isn't reachable by duplicating this whole section as

# "[authentication/ldap_fallback]".

#

host = localhost

port = 389

tls = 0

attribute = uid

base_dn =

filter =

bind_dn =

bind_password =

timeout = 10

verify = require

[system]

# Set language for login and admin forms. Currently "de" (German)

# and "en" (English, not perfect) are available.

language = de

# Set stylesheet for login and admin forms. Supported:

# lx-office-erp

# kivitendo - default

# design40

stylesheet = kivitendo

# MassPrint Timeout

# must be less than cgi timeout

#

massprint_timeout = 30

# Set default_manager for admin forms. Currently "german"

# and "swiss" are available.

default_manager = german

# The memory limits given here determine the maximum process size

# (vsz, the total amount of memory this process uses including memory

# swapped out or shared with other processes) or resident set size

# (rss, the amount of memory not swapped out/shared with other

# processes). If either limit is reached at the end of the request

# then the kivitendo process will exit.

#

# This only applies for processes under FCGI and the task manager.

# For CGI configurations the process will be terminated after each request

# regardless of this setting.

#

# Note: this will only terminate processes with too high memory consumption. It

# is assumed that an external managing service will start new instances. For

# FCGI this will usually be apache or the wrapper scripts for nginx, for the

# task server this will have to be the system manager.

#

# Numbers can be postfixed with KB, MB, GB. If no number is given or

# the number is 0 then no checking will be performed.

memory_limit_rss =

memory_limit_vsz =

[paths]

# path to temporary files (must be writeable by the web server)

userspath = users

# spool directory for batch printing

spool = spool

# templates base directory

templates = templates

# Path to the old memberfile (ignored on new installations)

memberfile = users/members

# Path to ELSTER geierlein webserver path inside kivitendo

# (must be inside kivitendo but you can set an ALIAS for apache/oe

# if set the export to geierlein is enabled

# geierlein_path = geierlein

#

# document path for FileSystem FileManagement:

# (must be reachable read/write but not executable from webserver)

# document_path = /var/local/kivi_documents

#

[mail_delivery]

# Delivery method can be 'sendmail' or 'smtp'. For 'method = sendmail' the

# parameter 'mail_delivery.sendmail' is used as the executable to call. If

# 'applications.sendmail' still exists (backwards compatibility) then

# 'applications.sendmail' will be used instead of 'mail_delivery.sendmail'.

# If method is empty, mail delivery is disabled.

method = smtp

# Location of sendmail for 'method = sendmail'

sendmail = /usr/sbin/sendmail -t<%if myconfig_email%> -f <%myconfig_email%><%end%>

# Settings for 'method = smtp'. Only set 'port' if your SMTP server

# runs on a non-standard port (25 for 'security=none' or

# 'security=tls', 465 for 'security=ssl').

host = localhost

#port = 25

# Security can be 'tls', 'ssl' or 'none'. Unset equals 'none'. This

# determines whether or not encryption is used and which kind. For

# 'tls' the module 'Net::SSLGlue' is required; for 'ssl'

# 'Net::SMTP::SSL' is required and 'none' only uses 'Net::SMTP'.

security = none

# Authentication is only used if 'login' is set. You should only use

# that with 'tls' or 'ssl' encryption.

login =

password =

[imap_client]

enabled = 0

hostname = localhost

username =

password =

# This folder can be managed with kivitendo through the background jobs

# CleanUpEmailSubfolders and SyncEmailFolder. Create no subfolder in the

# base folder by hand. Use / for subfolders.

base_folder = INBOX

# Port only needs to be changed if it is not the default port.

# port = 993

# If SSL is to be used, then set port to 993 or leave empty

ssl = 1

# Define a server for a specific email (e.g. info@test.de) with

# '[sent_emails_in_imap/email/info@test.de]'

[sent_emails_in_imap]

enabled = 0

hostname = localhost

username =

password =

# This folder must exist. Use / for subfolders.

folder = Sent/Kivitendo

# Port only needs to be changed if it is not the default port.

# port = 143

# If SSL is used, default port is 993

ssl = 1

# Import emails for records with BackgroundJob ImportRecordEmails

# Config can specified per type with [record_emails_imap/record_type/<record_type>]

# More configuration is possible in the data field of the BackgroundJob, for more see

# SL::BackgroundJob::ImportRecordEmails

[record_emails_imap]

hostname = localhost

username =

password =

# Use / for subfolders. Subfolders are not imported.

base_folder = INBOX

# Port only needs to be changed if it is not the default port.

# port = 993

# If SSL is to be used, then set port to 993 or leave empty

ssl = 1

# Further possible values

# email_import_ids_to_delete = []

# process_imported_emails = [zugferd]

# processed_imap_flag = $Label3

# not_processed_imap_flag = $Label4

# record_type = ap_transaction # set in BackgroundJob to get a specific config

[applications]

# Location of OpenOffice.org/LibreOffice writer

openofficeorg_writer = lowriter

# Location of the html2ps binary

html2ps = html2ps

# Location of the Ghostscript binary

ghostscript = gs

# Location of the program to create PDFs from TeX documents

latex = latexmk --pdflatex

# Location of the Python interpreter to use when converting from

# OpenDocument to PDF. Some distributions compile UNO support only

# into binaries located in different locations than the main Python

# binary.

python_uno = python3

[environment]

# Add the following paths to the PATH environment variable.

path = /usr/local/bin:/usr/X11R6/bin:/usr/X11/bin

# Add the following paths to the PERL5LIB environment variable.

# "/sw/lib/perl5" is for Mac OS X with Fink's Perl.

lib = /sw/lib/perl5

# Add the following paths to the PYTHONPATH environment variable for

# locating Python modules. Python is used when converting OpenDocument

# files into PDF files.

python_uno_path =

[print_templates]

# If you have LaTeX installed set to 1

latex = 1

# Minimal support for Excel print templates

excel = 0

# Enable or disable support for OpenDocument print templates

opendocument = 1

# Chose whether or not OpenOffice/LibreOffice should remain running after a

# conversion. If yes then the conversion of subsequent documents will

# be a bit faster. You need to have Python and the Python UNO bindings

# (part of OpenOffice/LibreOffice) installed.

openofficeorg_daemon = 0

openofficeorg_daemon_port = 2002

[task_server]

# Set to 1 for debug messages in /tmp/kivitendo-debug.log

debug = 0

# Chose a system user the daemon should run under when started as root.

run_as =

# Task servers can run on multiple machines. Each needs its own unique

# ID. If unset, it defaults to the host name. All but one task server

# must have 'only_run_tasks_for_this_node' set to 1.

node_id =

only_run_tasks_for_this_node = 0

[task_server/notify_on_failure]

# If you want email notifications for failed jobs then set this to a

# kivitendo user (login) name. The subject can be changed as well.

send_email_to =

# The "From:" header for said email.

email_from = kivitendo Daemon <root@localhost>

# The subject for said email.

email_subject = kivitendo Task-Server: Hintergrundjob fehlgeschlagen

# The template file used for the email's body.

email_template = templates/webpages/task_server/failure_notification_email.txt

[periodic_invoices]

# The user name or email address a report about the posted and printed

# invoices is sent to.

send_email_to =

# The "From:" header for said email.

email_from = kivitendo Daemon <root@localhost>

# The subject for said email.

email_subject = Benachrichtigung: automatisch erstellte Rechnungen

# The template file used for the email's body.

email_template = templates/webpages/oe/periodic_invoices_email.txt

# Whether to always send the mail (0), or only if there were errors

# (1).

send_for_errors_only = 0

[self_test]

# modules to be tested

# Add without SL::BackgroundJob::SelfTest:: prefix

# Separate with space.

modules = Transactions

# you probably don't want to be spammed with "everything ok" every day. enable

# this when you add new tests to make sure they run correctly for a few days

send_email_on_success = 0

# will log into the standard logfile

log_to_file = 0

# user login (!) to send the email to.

send_email_to =

# will be used to send your report mail

email_from =

# The subject line for your report mail

email_subject = kivitendo self test report

# template. currently txt and html templates are recognized and correctly mime send.

email_template = templates/mail/self_test/status_mail.txt

[check_below_minimum_stock]

# The user name or email address a report about the under stock parts is sent

# to.

send_email_to =

# The "From:" header for said email.

email_from = kivitendo Daemon <root@localhost>

# The subject for said email.

email_subject = Benachrichtigung: Artikel unter Mindestbestand

# The template file used for the email's body.

email_template = templates/mail/below_minimum_stock/error_email.html

[follow_up_reminder]

# Email notifications for due follow ups.

# The "From:" header for said email.

email_from = kivitendo Daemon <root@localhost>

# The subject for said email.

email_subject = kivitendo: fällige Wiedervorlagen

# The template file used for the email's body.

# If empty fu/follow_up_reminder_mail.html will be used.

email_template =

[follow_up_notify]

# Email notification for new follow ups.

email_from = kivitendo Daemon <root@localhost>

email_subject = kivitendo: neue Wiedervorlagen für Sie von <%creator_name%>

email_template = templates/mail/follow_up_notify/email_body.txt

[console]

# Automatic login will only work if both "client" and "login" are

# given. "client" can be a client's database ID or its name. "login"

# is simply a user's login name.

client =

login =

# autorun lines will be executed after autologin.

# be warned that loading huge libraries will noticably lengthen startup time.

#autorun = require "bin/mozilla/common.pl";

# = use English qw(-no_match_vars);

# = use List::Util qw(min max);

# = sub take { my $max = shift; my $r = ref($_[0]) eq 'ARRAY' ? $_[0] : \@_; return @{$r}[0..List::Util::min($max, scalar(@{$r})) - 1]; }

# location of history file for permanent history

history_file = users/console_history

# location of a separate log file for the console. everything normally written

# to the kivitendo log will be put here if triggered from the console

log_file = /tmp/kivitendo_console_debug.log

[testing]

# Several tests need a database they can alter data in freely. This

# database will be dropped & created before any other test is run. The

# following parameters must be given:

[testing/database]

host = localhost

port = 5432

db =

user = postgres

password =

template = template1

superuser_user = postgres

superuser_password =

[devel]

# Several settings related to the development of kivitendo.

# "client" is used by several scripts (e.g. rose_auto_create_model.pl)

# when they need access to the database. It can be either a client's

# database ID or its name.

client =

[debug]

# Use DBIx::Log4perl for logging DBI calls. The string LXDEBUGFILE

# will be replaced by the file name configured for $::lxdebug.

dbix_log4perl = 0

dbix_log4perl_config = log4perl.logger = FATAL, LOGFILE

= log4perl.appender.LOGFILE=Log::Log4perl::Appender::File

= log4perl.appender.LOGFILE.filename=LXDEBUGFILE

= log4perl.appender.LOGFILE.mode=append

= log4perl.appender.LOGFILE.Threshold = ERROR

= log4perl.appender.LOGFILE.layout=PatternLayout

= log4perl.appender.LOGFILE.layout.ConversionPattern=[%r] %F %L %c - %m%n

= log4perl.logger.DBIx.Log4perl=DEBUG, A1

= log4perl.appender.A1=Log::Log4perl::Appender::File

= log4perl.appender.A1.filename=LXDEBUGFILE

= log4perl.appender.A1.mode=append

= log4perl.appender.A1.layout=Log::Log4perl::Layout::PatternLayout

= log4perl.appender.A1.layout.ConversionPattern=%d %p> %F{1}:%L %M - %m%n

# Activate certain global debug messages. If you want to combine

# several options then list them separated by spaces.

#

# Possible values include:

# NONE - no debug output (default)

# INFO

# DEBUG1

# DEBUG2

# QUERY - Dump SQL queries (only in legacy code; see also "dbix_log4perl" above)

# TRACE - Track function calls and returns

# BACKTRACE_ON_ERROR - Print a function call backtrace when $form->error() is called

# REQUEST_TIMER - Log timing of HTTP requests

# REQUEST - Log each request. Careful! Passwords get filtered, but

# there may be confidential information being logged here

# WARN - warnings

# SHOW_CALLER - include the file name & line number from where a call

# to "message" or "dump" was called

# ALL - all possible debug messages

#

# DEVEL - sames as "INFO QUERY TRACE BACKTRACE_ON_ERROR REQUEST_TIMER"

#

# Example:

# global_level = TRACE QUERY

global_level = NONE

# Activate monitoring of the content of $form. If it is active then

# monitoring can be turned on for certain variables with the

# following:

# $form->{"Watchdog::<variable>"} = 1;

# Monitoring has a performance cost and is therefore deactivated by

# default.

watch_form = 0

# If you want to debug the creation of LaTeX files then set this to 1.

# That way the temporary LaTeX files created during PDF creation are

# not removed and remain in the "users" directory.

keep_temp_files = 0

# Restart the FastCGI process if changes to the program or template

# files have been detected. The restart will occur after the request

# in which the changes have been detected has completed.

restart_fcgi_process_on_changes = 0

# The file name where the debug messages are written to.

file_name = /tmp/kivitendo-debug.log

# If set to 1 then the installation will be kept unlocked even if a

# database upgrade fails.

keep_installation_unlocked = 0

# If set to 1 then all resource links (JavaScript, CSS files) output

# via $::request->{layout}->use_stylesheet() / use_javascript() will

# be made unique by appending a random GET parameter. This will cause

# the web browser to always reload the resources.

auto_reload_resources = 0

# If set to 1 each exception will include a full stack backtrace.

backtrace_on_die = 0

[cti]

# If you want phone numbers to be clickable then this must be set to a

# command that does the actually dialing. Within this command three

# variables are replaced before it is executed:

#

# 1. <%phone_extension%> and <%phone_password%> are taken from the user

# configuration (changeable in the admin interface).

# 2. <%number%> is the number to dial. It has already been sanitized

# and formatted correctly regarding e.g. the international dialing

# prefix.

#

# The following is an example that works with the OpenUC telephony

# server:

# dial_command = curl --insecure -X PUT https://<%phone_extension%>:<%phone_password%>@IP.AD.DR.ESS:8443/sipxconfig/rest/my/call/<%number%>

dial_command =

# If you need to dial something before the actual number then set

# external_prefix to it.

external_prefix = 0

# The prefix for international calls (numbers starting with +).

international_dialing_prefix = 00

# Our own country code

our_country_code = 49